Steam Designs uprated Mamod Showman's Engine - 30 April 2005

Steam Designs uprated Mamod Showman's Engine with engine running - 30 April 2005

Globe carousel with Gondolas by Wilesco - Powered by a clockwork motor in the base which is wound by a lever - 31 May 2006

Globe carousel in action. The carousel is 210mm high with 57mm long gondolas. - 31 May 2006

Clockwork Swing Gondolas by Wilesco - The motor can be seen at the top left under the canopy which is 170mm high - 31 May 2006

Clockwork Swing Gondolas - Each gondola is 57mm long - 31 May 2006

The clockwork Swing Gondolas with the motor running - 31 May 2006

Clockwork classic carousel with 2 seater cars - The carousel is 200mm high with 45mm long x 40mm high cars - 31 May 2006

The classic carousel under way - The clockwork motor is in the base and is operated by a lever - 31 May 2006

Indian made children's swing made from steel rod & printed tinplate - The two boys being made from flexible plastic - 13 June 2006

The swings are driven by a clockwork motor built into the clock - The overall size is 165mm high x 195mm wide x 150mm deep - 13 June 2006

The hands on the clock are one piece mounted on the spring shaft - The swings are driven by a simple escapement mechanism regulated by the two swings - 13 June 2006

German clockwork driven litho printed tinplate ferris wheel - the diameter of the wheel is 162mm - 15 June 2006

Ferris wheel - the clockwork motor is mechanically governed to prevent the wheel turning too fast -15 June 2006

German clockwork driven tinplate swing boats - 170mm high - 15 June 2006

Close up of the swingboats - 15 June 2006

German clockwork tinplate traditional canopy carousel with horses - Overall height is 200mm with a canopy diameter of 155mm - 15 June 2006

The carousel is powered by a spring motor under the base and wound by a lever on the side of the base - 15 June 2006

German clockwork tinplate small canopy carousel - with a canopy of 130mm in diameter and an overall height of 180mm - 15 June 2006

When running the gondolas swing out - the clockwork motor is housed in the base and wound using the lever on the side - 15 June 2006

Steam Designs uprated Wilesco Showman's Engine with engine & dynamo running - 3 March 2005

Steam Designs uprated Wilesco Showman's Engine in the dark with dynamo running - 3 March 2005